Mikelius

For those of us not using Wayland, any idea if this still applies? Waiting on my flatpak version to support audio sharing with screen share… And please performance improvements.

Haha, 1 year ago… Cannot remember, but I’m positive it was some failed autocorrect. Unfortunately I can’t figure out what was autocorrected. I’d just ignore “dusky” in that sentence. I don’t even know what word means lol

Hmm I’ll have to check this later as I don’t remember ever running into that problem since my Xbox internal has been full for a while. But I also wonder if that applies to physical copies or not since all my series x games are physical. Unless Xbox does this automatically in the background without user intervention, then I may have not noticed

Weird, I have a regular old 2TB (or maybe it was 1?) western digital plugged into the USB on the back of my series x and it works fine, not sure I understand the need to spend a bunch on something like this. Edit: and before responding about speed… I haven’t noticed much, if any, difference in game performance from installing on the drive or external outside of the initial game loading (startup) time, so not sure if that’s the only benefit to using the expansion slot.

Raid 1 has saved my server a couple of times over from disaster. I make weekly cold backups, but I didn’t have to worry about it when my alert came in notifying me which drive went dead - just swap, rebuild, move along. So yeah I’d say it’s definitely worth it. Just don’t treat raid as a backup solution - and yes, continue to use an external cold storage backup solution as you mentioned. Fires, exploding power supplies, ransomware, etc don’t care if you’re using raid or not.

The langolier has caught much attention. Please share its purpose…

I bought “Inside”. Was told it was basically predecessor to Little Nightmares and I’m really loving it so far

I’d say anyone wanting to go this deep into a home monitoring setup will likely go with what works best for them instead of reading and following the entirety of this guide… I’m one of those people…

Wrote my own log parsing software to put into a database, display and alert through grafana, which is alerting through a homemade webhook that sends a notification to ntfy based on severity… And I also use uptime Kuma like mentioned, but my notifications channel is ntfy. No cloudflare for my internal services, only wireguard to connect home and use everything. And definitely no telegram.

Plenty of other stuff setup, but my security alerts and monitoring rely heavily on the syslog/grafana server which helps me monitor everything.

Not an opinion, I have an actual situation with my eyes where they twitch uncontrollably when presented with bright lights for a long period of time. I have tried minimum screen brightness, lowered contrast/colors, auto brightness based on the environment, various software solutions to removing blue light 24/7 from the screen - none of it worked. Went permanently dark theme on everything, magically eyes haven’t twitched in years.

Light theme vs dark theme is not just a preference, it’s an actual accessibility need for some of us.

I can make large and complicated games, but my 3d art skills are absolute trash. I envy you for having both skills and being able to get this far in one year. Either you’re young with time on your hands, or you’re a genius. Or both…

Good job btw!

I converted my gaming machine into a server as well. I actually took the graphics card out as I couldn’t find a major use for it, but kept the 12 core Ryzen and upped it to 128gb memory. It now self host way too many things, including a few game servers my friends and I play… But even with all this, CPU carries along nicely and not even at half memory consumption (yet).

But as others have asked, what’s your goal? Don’t overkill it if you’re only hosting one service or something. If you’re doing a lot like I do, then up the RAM. And seriously consider whether the GPU is even useful or needed if you’re not using a desktop environment.

I’ve had this issue many times as well. I’ve found changing the MTU would help since it seems some filter specific ranges. Doesn’t always work but I’ve had more success than failure doing so

Glad I looked at this thread. The fact they’re cheap and have what sound like reliable PoE hats… Tempted to replace a few old Pis lol. Maybe. But can at least say no future devices will be Pis at this point.

Note: only using them for simple things. Wireguard VPN (no I don’t have a fast internet so I don’t need more than the 1gb connection speed), pi hole, and a touch panel I installed that connects to home assistant on the wall.

I was super excited for this game until I heard about the free cam… Really hoping it’s something that can be turned off. A core piece of the original horror was hearing something coming but not being able to see it.

Thanks for clarifying! Took a deeper look on my computer and I guess I learned that NoScript was misidentifying due to the cors or something. Just had to call it out before, as one can never be too careful these days :D

I use iperf3 with Speedtest’s servers, personally. But for a browser, yes JavaScript is needed… But needing JavaScript files from like 20 different domains is typically a red flag for me on any site.

My solution to this question a year or so ago was to take my gaming desktop, which was collecting dust after I moved to my gaming laptop, and gut it down to a 4U server rack case. Best decision I’ve ever made. 12 core Ryzen and 128gb memory. Got a 10g adapter in the pci express, 8xHDD for data and then 2 mirrored nvme for the OS itself. Only thing I kept out was the video card since I had no use for it (yet)

An equivalent “server” on the market would probably cost a fortune and cost you a ridiculous amount of electricity.

The NoScript list terrifies me a little though… Not sure what’s going on there, but that’s a lot of JavaScript lol.

Lots of comments already mentioning the differences. I have tried these, including the mentioned ipfire, and decided on the end to use opnsense plus openwrt on two different devices.

I chose opnsense at the time many years ago because it supported wireguard out of the box, where as pfsense required some weird install process I didn’t want to deal with. Plus I liked the UI to opnsense more.

My moden has been literally replaced by my firewall so I have the ONT connected to it and then use it to do all the heavy lifting for… Well, firewall stuff. It connects to a VPN so my entire network routes through the VPN. Then my openwrt device is connected to that. It also handles firewall stuff, but more at an internal level (keeping network devices only permitted to communicate with devices I say are okay, blocking internet access, etc) and also hosts my nginx setup to route to various servers.

While I could do everything on one machine with opnsense, I’ve got a particular setup that allows me to have multiple devices at the firewall level, truly isolated from the rest of my internal network (for a couple of internet open port services). And it gives me peace of mind that if someone found a zero day in opnsense, I’m not totally screwed unless they also got one in openwrt.

To answer “which is better to begin with”, I personally find opnsense way more flexible and robust than the other 2 options. Has a lot more capabilities and upgrading is super easy without requiring jumping through weird hoops and such like openwrt does.

I totally thought because of how long the equals looked, it was multiple equals characters, not just >>= lol. That’s what got me confused. Don’t think these are things I’d personally use but each to their own preferences right xD

What is that weird >>=== symbol? Looks like a cross breed between C and JavaScript here.