The player does have a large effect on both those things. A player that supports the codec will not need server hw accept and hdr conversion as it will direct stream. A big issues is these codecs can cost money. So if the player doesn’t come with it the player needs to pay for it, something plex may be doing for those that purchased their subscription.

Linoleum isn’t plastic, you may be thinking of vinyl flooring which looks similar. Vinyl is cheaper and newer while appearing very similar to linoleum.

Jellyseer is a jellyfin comparable alternative to ombi.

Their isn’t one way to make a flat head screwdriver. Some a chisel and some are slots. The slotted ones are better but more expensive.

Both still slip from the screw and are a pain to manually screw (slotted less so).

Pozi is the best + type screw. It’s pretty much standard for UK construction. The only time a different type is used is sometimes Phillips for plaster board or external hex and internal torx for long or large screws.

The need to transcode is based on the media formats supported by the tv. Only Sony and high end LGs have the right support to play blurays. Some tvs struggle to play files that have many different subtitle formats embedded in them as well which is also common for Blu-ray rips.

The subtitles will be the first file in the list of the media unless you select regular subtitle language in the menu under playback under the account symbol in the top right hand corner.

A glass may have a spec that allows it to be filled to the brim. Doesn’t mean it’s a good idea, especially when you want to run up stairs with it.

Your going to spill water everywhere.

Too long in the dryer and they cook. Think of dryered flowers, they go brittle and scratchy when they’ve been dried. When those same flowers are fresh their petals are soft.

Fabric softener is a scam. It just coats your clothes in plastic. It will lead to rougher clothes over time.

Your likely over drying your clothes and causing them to be harder and coarser than they need to. Your then compensating with fabric softener.

People have attached pens to 3d printers and used them to write letters, effectively print. Most consumer 3D printers are useing or based on open source software.

I think the issue is, printers are relatively cheap to buy and replace. So building your own and programming it hasn’t been necessary. Where as 3d printing was completely in accessible before the reprap movement. 3D printing software is open source as it is motivated by people wanting to build their own machines that could build machines. Something you couldn’t easily buy.

It costs extra to have hardware that can support the full spec on all ports simultaneously. The rear ports have the higher bandwidth to support screens with lots of pixels and a high frame rate, plus they are more likely to be daisy chained.

A small computer, large capacity ssd and two WiFi interfaces (2x usb dongles, or dongle plus usb).

Small computer could be anything: raspberry pi (or generic and), nuc mini pc or laptop. If you want to use it without a plug you’ll need to add a battery, usb c powered devices could be more convent to power from a battery.

A ssd is better for this use case. Not because it’s faster, but they are more resilient to being knocked about and dropped. They are also much smaller, especially M.2, and aren’t fussy about how they are mounted.

The two WiFi interfaces would allow you to create a WiFi bridge to access the internet through a WiFi network and access your media server. It would need some configuration, you may also need to have the computer act as a router if you want to use multiple devices without reconfiguring.

It may be easier to have your device act as a WiFi hotspot and have the media centre automatically connect to it. This would make it difficult for multiple devices to use it simultaneously, and you could accidentally allow the media centre to do all its updating and downloading over your mobile connection.

This type of thing is going to be expensive and troublesome to configure unless your already experienced with that sort of thing.

I think a better solution, especially if you already have a media server. Is to set your media server for external access.

To get media when you don’t have internet, buy a large capacity flash drive (or external ssd/hdd). When you have access to your media server download all the content you want on to the drive. I think iOS jellyfin can do this without much modification.

Once out of range of your media server. Delete the content you’ve watched on your device (iPad) to free up space. Connect the external drive through the usb port on the iPad, copy over the next lot of content you want to watch. Disconnect and then watch the content.

Jellyfin can download the content, but you may need another app to play it when you don’t have access to the media server.

This approach lets multiple people access a much larger amount of media, effectively simultaneously. It doesn’t require a large amount of often expensive local device storage - you use cheap external storage. It much less expensive if it breaks or gets lost and has very little configuration -if you already have a media server running jellyfin.

Head and shoulders has anti-fungal properties. That may have been the source of your smelling problem.

Mac isn’t UNIX based, it is UNIX and comes with many of the UNIX tools a user would expect. Completely different situation.

Anyone saying it works is lieing. Even if they have examples. Most of the time when companies self regulate it is to maintain control and avoid regulation. It’s a delaying tactic that allows them to exploit the mechanisms longer and minisme the impact that proper accountability would bring.

If self regulation was feasible we would never even be discussing it. It wouldn’t be a concept we would have to think about. It would just be the way things work and have always worked.

Probably not much for people on a self hosting community, but those that want to get away from subscriptions and steal your data as a service cloud providers that might need some reassurance that they’ll have a working system.

Nixos is an os that’s defined by its config stored in .nix files. Everything is defined here all the software and configurations. Two people with the same script will have the exact same os.

Any changes you make that aren’t in the scripts won’t be present when you reboot.

You could maintain a very custom linux distribution (kinda) by just maintaining these config scripts.

So a user wouldn’t need to install all required software and dependencies. They could get a nixos and the self-host config and adjust some settings and have a working system straight after install.

It’s hard to get a good read on these things. You’ll only see the perspective of the person that thinks they were cheated by the IRS. The IRS won’t make Reddit posts about people carrying out tax evasion.

Likewise you say the IRS dont think it’s a business. They probably carry out much stricter measures than that. Probably much stricter than the people complaining on Reddit. The people complaining also only “think” it’s a business.

There isn’t much sugar in brains, so their teeth may last longer than the average alive human.

Most common maybe. I feel most windows users aren’t actively choosing to use windows. It’s just what they are left with.

People usually choose to use Linux or Mac. As Linux is rarely preinstalled or like Mac more expensive (when it comes preinstalled) than the windows devices for sale. I’m not convinced given a fair shake, windows would have the market share it does.

Servers have highly informed people making decisions about their operating systems. When weighing the options about uptime, security, etc they rarely choose windows. Cost isn’t really a factor relative to the price and operation of the server.

Its subsidies that keep it cheep. Producing beef doesn’t provide free milk. Typically different varieties of cattle are used for dairy and beef. But dairy cows may end up in low grade beef - except when they are put to pasture after their useful life and given a year to rest (this beef is more expensive).